FAQ

Frequently Asked Questions

Is it good to seal pavers in Florida?

Yes, for pavers that have faded, lost joint sand or started to grow green. Unilock, a paver maker, says sealer helps resist the fading caused by strong sun and UV, and it firms up the upper layer of the joint sand so weeds find it harder to root. It is optional, though, since pavers do not need a sealer to hold up. To see whether yours are ready, request your free estimate.

How much is sealant for pavers?

The sealer itself runs about $80 to $150 per gallon, according to Unilock, and a gallon covers roughly 80 to 150 square feet depending on the type. Most of a quote pays for the cleaning and joint sand around it. Companies on the First Coast publish $1.75 to $3.25 per square foot for the whole job, so a 600 square foot driveway lands near $1,050 to $1,950. For a number on your own surface, call (904) 914-8201.

How long do paver sealers last?

Plan on two to five years. Unilock says many owners reapply every three to five years, while a Safe Touch page for the First Coast calls two to three years typical. Full sun, pool chlorine and heavy summer storms push a coat toward the short end. To have a coat checked, call (904) 914-8201.

How long does paver sealing take in Bellair-Meadowbrook Terrace?

Most homes take one to two days. Safe Touch says pavers with empty joints turn into a two day restoration, because the surface has to dry between the wash and the sealer. An afternoon storm can move the second day. To ask about timing for your pavers, request your free estimate.

Does the summer rainy season in Clay County matter when sealing pavers?

Yes. Sealer needs 24 to 48 hours of clear skies before it goes on, says Unilock, and it needs up to 48 hours of dry weather afterward to cure. The wet season brings about 28.8 inches of rain between June and September, so a contractor looks for a dry window and often waits for fall. To plan around the forecast, call (904) 914-8201.

Is it better to spray or roll paver sealer?

Many contractors do both. Unilock lists a garden style sprayer, a foam roller or a short pile roller, and it suggests a dry roller to soak up extra sealer so the finish does not streak. An even coat matters more than which tool laid it down. To ask what a contractor plans to use, request your free estimate.

Is it good to seal pavers in Florida?

Yes, if the color has faded or the joints are losing sand. Sealer evens out the color, resists sun fading and makes the surface easier to sweep and wash, according to Unilock. It is a choice and not a rule, because pavers do not need sealer to perform.

How long do paver sealers last?

Most last three to five years by Unilock's count, and a First Coast washing company puts two to three years as typical. A sunny driveway, pool chlorine and hard summer storms push a coat to about two.